M-Audio Drums User's Guide download pdf (Page 89)

Master Output Volume Slider/Meter

The master output volume slider/meter is located

to the far right on the Control Bar. It is used to control

the master audio output level during playback.

The meter features an LED-type display with different colors to indicate the low/mid/high

level stages. There is a Peak indicator that will display for three seconds.

A clipping indicator is also available. If the two single LEDs to the right in the meter light up,

the signal has exceeded the maximum level and thereby caused clipping. You can reset

this indicator by clicking on it. Clipping means that the signal peaks are cut off once they

exceed the maximum level.

Important: Clipping may distort the output sound.

Ignite's master volume can be adjusted using the following M-Audio keyboards:

• M-Audio Axiom AIR 49 or Axiom AIR 61: Fader [9].

• M-Audio Axiom Pro 49 or Axiom Pro 61: Faders [F9].

• M-Audio Axiom 49 or Axiom 61: Fader [F9].

• M-Audio Oxygen 49, Oxygen 61, or Oxygen 88: Fader [C9].

Master Output Limiter

When you enable this button by clicking on it, the master output level is limited so that

clipping does not occur. The Limiter button has a red outline when you activate it. A red dot

in its middle indicates when the Limiter sets in. The brighter red the center becomes, the

higher the level peaks that the Limiter receives.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 138 139

No comments

M-Audio Drums User's Guide Page 89