M-Audio Drums User's Guide download pdf (Page 32)

Audio Output

To change the device that Ignite uses for playing back your Session:

1. Select the desired audio output device by clicking on its icon. A white frame indicates

the currently selected audio output device.

2. If the output device offers more than two output channels, you can select an output

channel pair by clicking on the value next to the word Output. A local menu appears

where you can select the desired stereo output pair.

Important: Ignite supports two audio outputs only.

Audio Input

Ignite supports ASIO (Windows), WASAPI (Windows), and Core Audio (Mac) devices. If

you are using a WASAPI or Core Audio device, the available devices that Ignite can use for

recording audio are shown in the lower half of the screen. If you are using an ASIO device,

you will see only one row of devices.

To change the device that Ignite uses for recording audio into your Session:

1. Select the desired audio input device by clicking on its icon. A white frame indicates

the currently selected audio input device.

2. If the input device offers more than one input channel, you can select an input channel

by clicking on the value next to the word Input. A local menu appears where you can

select the desired input. If the Mono / Stereo switch is set to stereo, the inputs will be

shown in pairs. At this time, Ignite supports a single mono or stereo audio input only.

3. You can confirm that audio input is working by checking if the Input Level meter is

moving up and down when audio is being input into the selected device.

Windows users: If you are using an ASIO device, you will experience better audio

performance than with a WASAPI device.

ASIO requires that the same device be used for playing back and recording audio so the

Output and Input sections will be shown together in the top half of the screen.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 138 139

No comments

M-Audio Drums User's Guide Page 32