M-Audio Profire 610 User Manual download pdf (Page 8)

User Guide 7ProFire 610

Rear Panel Descriptions

    

10. Power Input ( ) - Connect the 12VDC 2A power supply here when using ProFire 610 with a four-pin FireWire

connection, or if your computer does not provide sufﬁcient bus power on a 6-pin connection. If your computer can

provide power over a 6-pin connection, it is not necessary to use the included power supply.

Use only the power supply provided with the interface or a power supply with equivalent speciﬁcations.

11. FireWire Connectors (

) - Connect your computer to ProFire 610 using one of these FireWire ports and the

included FireWire cable. The second FireWire port allows additional equipment, such as an external hard drive, to be

connected in a daisy-chain to the computer. Do not connect the second FireWire port to another computer.

ProFire 610 does not offer any kind of FireWire networking capabilities and attaching the interface to two computers

may result in damage to the interface and/or the computers.

! IMPORTANT: Do not connect or disconnect bus-powered M-Audio, or 3rd party FireWire devices

while your computer is running (i.e. no “hot-plugging”). Make all FireWire cable connections while the

computer is powered off.

Reports have come to our attention of isolated problems when hot-plugging IEEE 1394

(aka “FireWire”) devices, including, but not limited to devices of the M-Audio FireWire family.

Hot-plugging refers to making connections to1394/FireWire ports while one or more of the

devices (including the computer) are still powered on. There have been rare occurrences when,

after hot-plugging, either the FireWire peripheral or the host computer’s FireWire port are rendered

permanently inoperable.

Please consult the Knowledge Base in the Support section at www.m-audio.com for updates on this

important issue.

12. MIDI In and MIDI Out Connectors - MIDI input and output on standard 5-pin DIN connectors. Connect a MIDI

controller keyboard, sound module or other MIDI device to these ports.

13. S/PDIF Coaxial In and Out Connectors - S/PDIF digital input and output on coaxial RCA connectors. Sample

rates of up to 192kHz are supported.

14. Line Outputs - These 1/4” TRS jacks provide eight channels of discrete balanced or unbalanced analog output.

15. Line Inputs - These two 1/4” TRS jacks provide two channels of balanced or unbalanced analog input. These will

appear as the second pair of inputs (e.g. inputs 3/4) in your audio application.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

No comments

M-Audio Profire 610 User Manual Page 8