M-Audio Profire 610 User Manual download pdf (Page 11)

User Guide 10ProFire 610

Connecting the Analog Outputs

Connect the rear-panel line outputs

to a mixing console, ampliﬁer or powered monitors. By default, analog

output pair 1/2 is controlled by the front-panel Master Volume knob

, however, this knob can be assigned to

control other outputs pairs through the ProFire 610 Control Panel.

! CAUTION: Analog output streams that are not assigned to be controlled by the Master Volume

knob will be sent to the analog outputs at maximum level.

✓ T I P : To control the level of the main monitor mix without affecting the level at the headphone

outputs, assign the Master Volume knob to either analog outputs 5/6 or 7/8 and use those

outputs for your main monitors. This prevents the Master Volume Knob from inﬂuencing the

levels of headphone outputs 1 and 2 and effectively provides front panel volume controls for

three unique stereo outputs.

If you already have a way of controlling the main monitor mix level (e.g. through the use of an

external mixer), another good use for the assignable Master Volume Knob is as an auxiliary

send. Simply connect one of the analog output pairs to an outboard effects unit and assign the

Master Volume Knob to the respective channels. Bring the outboard effect’s outputs back into

the ProFire 610 interface using line inputs 3 and 4 as the auxiliary return and use the Master

Volume Knob to control the auxiliary send level.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

No comments

M-Audio Profire 610 User Manual Page 11