M-Audio Profire 610 User Manual download pdf (Page 18)

User Guide 17ProFire 610

Edit

This menu lets you cut, copy and paste track names or entire mixer settings. This menu will appear in one of

two ways:

1. If a mixer tab name or track name is selected for editing: the Edit menu displays “Cut,” “Copy,” and

“Paste.” These options let you cut, copy, and paste selected text just like a text editor.

2. If no text ﬁeld is selected for editing, the items in this menu appear as “Copy Mixer Settings” and

“Paste Mixer Settings.” These selections let you copy and paste all settings on a mixer tab (including

button, knob, and fader positions). This is a helpful feature for users who wish to duplicate monitor mix

settings from one tab to another.

✓ T I P : If you have ﬁne-tuned a monitor mix for an artist on the “Analog Out 1/2” tab and

would like to create a slightly different monitor mix for another artist on the “Analog Out

3/4” tab, you can simply copy the settings from the ﬁrst tab to the second using the Edit

menu and make small changes. This saves you from having to manually transfer all of the

mixer settings before making the changes.

View

This menu lets you change the conﬁguration of the meters at the top of the monitor mixer tabs (i.e., the Analog

Out 1/2, 3/4, 5/6, 7/8 and S/PDIF Out L/R tabs).

Meters Only View

Selecting this option hides all of the buttons, knobs, and sliders for each of the monitor mixers and only

displays the level meters. This is a useful feature for users who have ﬁnished setting up monitor mixes and

would like to use only the meters to simply observe incoming signal levels.

Note that selecting this option hides the buttons, knobs, and sliders in the Control Panel but does not

affect their settings in any way.

Meters are Displayed:

This section determines the behavior of the meters of the ProFire 610 monitor mixers.

Pre-fader – When this parameter is set to “Pre-fader” the meters will display the level of a signal before

it passes the fader. This allows signal levels to be displayed regardless of the fader positions within the

monitor mixers (i.e., a fader can be all the way down and no sound will be heard from the mixer’s output,

but you can still see if there is any activity on that input).

Post-fader – This setting conﬁgures the meters to show levels after signal has passed through the faders.

In this conﬁguration, fader positions will affect the meters. For example, a fader that is all the way down will

result in no signal being displayed on its meter.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

No comments

M-Audio Profire 610 User Manual Page 18