M-Audio DELTA 1010LT Specifications download pdf (Page 19)

Windows may also use the Delta 1010LT as its default MIDI device. This allows the

Delta 1010LT to be used with the MIDI applications included with Windows. To set this

up, go to Control Panel | Multimedia | MIDI. Set the Delta MIDI driver as the default

Windows MIDI driver by clicking on the "MIDI Out Delta-1010LT" entry in the driver

list, then selecting "OK" or "Apply."

MACINTOSH SOUND MANAGER INPUTS AND OUTPUTS: The Apple Sound

Manager limits the user to one stereo pair for input and one stereo pair for output. Within

your music software, the device selection when using the Sound Manager drivers for input

and output will be “Sound Manager” both for input source and for output port.

To select the Sound Manager driver, open the Apple Menu and go to Control Panel |

Sounds. For both “Sound In” and “Sound Out,” click and highlight the Delta icon, then

exit. You may select which Delta hardware stereo input pair and stereo output pair will be

used for the Sound Manager’s Sound In and Sound Out in the Delta Control Panel

“Hardware Settings Page” (see section, “Hardware Settings Page”under “Delta Control

Panel”). Whichever stereo pair you select, the software input and output device selection

within your music program will remain the same, namely, “Sound Manager.”

Delta 1010LT Control Panel Software - PC

Once the Delta 1010LT is properly installed, an "M Audio Delta H/W" icon will be

displayed in your Windows Control Panel. By double-clicking on that icon, you will

launch the Delta Control Panel software. You may also launch the Delta Control Panel

software from the desktop if you have previously created a shortcut there (see "Verifying

Delta Control Panel Software Installation" section for instructions on how to do this).

Once the Delta Control Panel software has been opened, you will see the main panel and

its several tabs. To display a desired page, click on its tab. Below are functional

descriptions of each page.

NOTE: When using a music software program that is ASIO capable,

launch the Delta Control Panel software from within that program.

There will be a button in the ASIO or Audio setup page that will

allow you to do so. Some of the control panel functions will be

controlled from within that program, such as master clock setting

and sample rate, so it is desirable to launch the music program

first, and then the Delta Control Panel from the the program’s

“launch” or “control panel” button. Without the music program

open however, it is okay to open the Delta panel from your desktop

or other location.

Monitor Mixer Page

The Monitor Mixer is the first page that appears when the Delta Control Panel is opened,

and controls the digital mixer built into the Delta 1010LT’s PCI controller chip. As

described in previous sections, the output of this mixer may be assigned to the

OUT1/OUT2 analog outputs and/or the S/PDIF Out digital output (this selection is made

in the Patchbay Router page). At the same time, the mixer outputs may be recorded in

stereo by software.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 58 59

No comments

M-Audio DELTA 1010LT Specifications Page 19