M-Audio Firewire Audiophile Owner's Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 57
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
6 Controls and Connectors
Front Panel Diagram
Front Panel Descriptions
1 Headphone Output – Accepts a standard 1/4” stereo TRS headphone connector.
2 Headphone Output Level – Controls the output of the headphone level. This
control is independent of the line and S/PDIF output levels.
3 HP Source Monitor Status –These LED indicators display the currently selected
mode of the headphone source switch, either A or B.
4 Headphone Source Selector – This momentary switch selects the monitor source sent
to the headphone outputs, in conjunction with the HP Source settings on the Hardware
page of the Control Panel. The default setting is Out 1/2 = A, Out 3/4 = B. This switch can
also be programmed to turn Direct Monitoring on and off.
5 S/PDIF Input and Output Indicators – The green S/PDIF In LED will glow
steadily to indicate the presence of a valid S/PDIF signal at the S/PDIF input. The
green S/PDIF Out LED will glow steadily to indicate the presence of a valid
S/PDIF signal at the S/PDIF output.
6 Level Controller – The Level Controller is a rotary encoder that is set by default
to control the output monitor level of the FireWire Audiophile’s analog outputs. It
can be assigned to any group of Mixer or Output faders in the FireWire
Audiophile’s software control panel. The available selections are:
SW return – The levels of the three virtual stereo pairs returning from your computer’s
audio workstation software to the FireWire Audiophile’s software mixer
Output – The levels of the FireWire Audiophile’s four analog and one stereo digital output
Input – The levels of the FireWire Audiophile’s 1&2 analog and L/R digital inputs
Aux Send – The levels of the L and R virtual Aux Send buses.
7 Power LED – The Blue Power LED blinks when power is applied to the FireWire
Audiophile, and glows steadily to indicate a valid connection to the host computer.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 56 57

Comments to this Manuals

No comments