M-Audio Firewire Audiophile Owner's Manual download pdf (Page 38)

Output Page

The output page provides you with control over each of the FireWire Audiophile’s

analog and digital outputs, as well as that of the aux bus and headphones bus.

Output Channels – Virtual faders control the individual channel output levels. The

output faders correspond to their respective analog and digital hardware outputs. When

the main/aux button is set to main, the Output Channel gets its signal from the bus

assignments selected on the mixer page. (See “Main/Aux Button,” below.)

Balance Controls – The bal control allows you to adjust the balance of the associated

pair’s stereo output.

Linking - Stereo pairs can be linked together with the link button above each channel

pair. Once the channel is linked (the button turns blue), grabbing and moving one fader

will move both faders in unison.

Main/Aux Button – When the main/aux button is in the main position (the button turns

blue), the associated analog or digital outputs carry their respective bus signals, as

determined by the routing selected on the mixer page:

• outputs 1/2 out carries signals routed to bus 1/2

• outputs 3/4 out carries signals routed to bus 3/4

• outputs spdif out carries signals routed to bus spd

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 56 57

No comments

M-Audio Firewire Audiophile Owner's Manual Page 38