M-Audio Fast Track C400 User's Guide download pdf (Page 15)

Chapter 4: Hardware Connections 11

chapter 4

Hardware Connections

To hear audio recorded from Fast Track C400,

you will need to connect headphones or an ex-

ternal sound system (such as powered monitors

or a home stereo) to Fast Track C400. Sound

from Fast Track C400 cannot be played through

your computer’s speakers or your computer’s

sound output.

Connecting Headphones

On the front panel of the Fast Track C400 is a

1/4-inch jack to connect headphones. The vol-

ume level of the headphone signal is controlled

by Headphone Volume knob on the top panel.

Connecting a Sound System

The Line Outputs on your Fast Track C400 are

grouped in pairs that correspond to the top-

panel Output Selector buttons A and B.

These connections support 1/4-inch balanced

TRS (Tip, Ring, Sleeve), or unbalanced unbal-

anced TS (Tip, Sleeve) connectors. These outputs

can be connected to any amplification system:

powered speakers, a home stereo system, or an

audio mixer.

Please refer to your audio application's doc-

umentation to learn how to route signals to

and from Fast Track C400

Headphone jack on Fast Track C400 front panel

1/4-inch

Headphone jack

Headphone Volume

Home stereo systems often use RCA connec-

tors. You can use adaptors or a cable to con-

vert from the Line Output connectors on

Fast Track C400 to the RCA connectors on

your home stereo.

Fast Track C400 Stereo outputs A and B (back panel)

Outputs B

Outputs A

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 48 49

No comments

M-Audio Fast Track C400 User's Guide Page 15