M-Audio RAD-050503 User Manual download pdf (Page 12)

10 American Dryer Corp. 113188-3

I. AUDIO ALERT ON TIMES 0 TO 10

The tone will sound at the end of the Cool Down Cycle to indicate that the cycle is complete. Programming

allows for the elimination of the tone during the Wrinkle Guard Cycle. This is done in the WRINKLE GUARD

SETUP. Programming also allows the beeps to be set from 0 to 10 beeps in increments of one (1). This is done

in DRYER SETUP.

J. PREPROGRAMMED CYCLE PREVIEW

The parameters of the preprogrammed cycles can be displayed for verification. To view an A-F preset

program (parameter), simply press the START/ENTER key and the desired preset program A-F. The

light emitting diode (L.E.D.) display will read the program parameter settings, then return to the READY

display mode. To view a 0-40 preset program parameter, simply press the START/ENTER

key and the

desired preset program number 0-40 followed by the START/ENTER

key again. The L.E.D. display will

read the program parameter settings, and then return to the READY display mode.

K. REVERSING OPTION

This feature helps reduce balling-up or tangling of large items.

REVERSING OPTION SELECTIONS:

1. Reverse On or Reverse Off

2. This option can be set to ON or OFF for each cycle individually.

3. Basket (Tumbler) Spin Time and Dwell (Stop) Time

a. Fixed in the Automatic AUTO Mode and cannot be changed.

1) Spin Time  2 minutes forward and 2 minutes reverse.

2) Dwell (Stop) Time  5-seconds.

b. Programmable in the Manual Mode.

1) Spin Time  Programmable from 30-seconds to 120-seconds, in 1-second increments.

2) Dwell (Stop) Time  Programmable from 5-seconds to 10-seconds, in 1-second increments.

L. DIAGNOSTICS

The Phase 7 non-coin microprocessor controller (computer) monitors the Drying Functions, which include

temperatures, burners, sail switches, blower, basket (tumbler), and lint drawer.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 89 90

No comments

M-Audio RAD-050503 User Manual Page 12