M-Audio Pro Tools M-Powered 7 Specifications download pdf (Page 14)

Getting Started with Pro Tools M-Powered10

Installing M-Audio Drivers

The Pro Tools M-Powered Installer CD-ROM in-

cludes M-Audio drivers for using Digidesign-

qualified M-Audio interfaces on Windows XP.

To install the M-Audio driver for your M-Audio

interface:

1 If you are using an M-Audio FireWire inter-

face, disconnect it before proceeding.

2 Insert the Pro Tools M-Powered Installer CD-

ROM for Windows in your CD-ROM drive.

3 Locate and open the M-Audio Driver Installers

folder, and double-click the driver for your inter-

face type, as follows:

• For M-Audio FireWire interfaces, double-

click on FW_WDM_5.10.0.5034.exe.

• For M-Audio PCI interfaces, double-click

on Delta_WDM_5.10.0.5050.exe.

4 Follow the on-screen instructions.

5 When installation is complete, shut down

your computer.

6 If you are using an M-Audio FireWire inter-

face, do the following:

• Once your computer has shut down com-

pletely, connect your FireWire interface

and power it on.

7 Turn on your computer.

8 When your system recognizes the new hard-

ware, run the Found New Hardware Wizard. Fol-

low the on-screen instructions.

Installing Pro Tools

M-Powered Software

After the Windows System software settings are

configured and you have installed your M-Au-

dio interface and drivers, you are ready to install

Pro Tools M-Powered.

To install Pro Tools M-Powered on Windows:

1 Make sure you have conﬁgured all the re-

quired Windows system settings, and restarted

your computer. See“Windows System Settings”

on page 7 for more information.

2 Start up Windows, logging in with Adminis-

trator privileges. If you do not have Administra-

tor privileges or do not know how to set them

up, see your Windows User’s Guide or ask the

administrator.

3 Insert the Pro Tools M-Powered Installer CD-

ROM for Windows in your CD-ROM drive. Lo-

cate and open the Pro Tools Installer folder, and

double-click the Setup icon.

4 Click Next to begin installation.

Pro Tools will not see your M-Audio inter-

face if you do not install the M-Audio driver

that is included with Pro Tools M-Powered.

If you get a warning dialog about the driver

not passing Windows Logo testing, click

Continue Anyway.

If you are prompted to run the Found New

Hardware Wizard a second time, run it

again.

In your M-Audio Control Panel, make sure

that output channels 1 and 2 are not set to

–Infinity (–∞).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 64 65

Comments to this Manuals

No comments