M-Audio RAD-050503 User's Guide download pdf (Page 18)

represents the controller’s function or the Controller #, the DATA ENTRY slider

will immediately function to select the transmitted value of that specific controller

when the slider is moved.This can be very useful for manipulating various functions

during actual performance, mixing or recording, etc..

Assignable Sliders and Knobs

The Radium keyboard comes with 9 banks of factory presets. These presets

work well with a variety of MIDI devices.The default assignments for the sliders

and knobs which load when the Radium is powered on have been selected in

order to work well with General MIDI instruments. They are listed in the

following table.

Preset # Channel # Contoller # Definition Application

(Sliders:)

1182 Attack Filter

2183Decay “

3128 Sustain “

4129 Release “

5181 Filter Envelope “

6174 Cutoff “

7171 Resonance “

812Breath Misc. Controls

(Knobs:)

915Glide Time “

10 1 10 Pan “

11 1 21 Pitch, Coarse Oscillator

12 1 77 Pitch, Fine “

13 1 16 Filter Rate LFO

14 1 19 Filter Depth “

15 1 18 Pitch Depth “

16 1 80 Amp. Depth “

*Refer to Appendix B of this manual for the information of the remaining preset banks.

Programming the Sliders and Knobs:

Pressing the MIDI/SELECT button and then the SET CTRL key will allow you to

begin programming the controller sliders and knobs. In order to change the

value of each slider (1 - 8) and knob (9 - 16), do as follows:

1. Press MIDI/SELECT, then the Set Controller key (marked “SET CTRL.)” The

display will show a small “n” to indicate that the desired controller knob

“number” should be entered next.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 26 27

No comments

M-Audio RAD-050503 User's Guide Page 18