M-audio Duo USB User Manual download pdf (Page 6)

Bottom of Unit:

At the bottom of the unit are two DIP switches that will set the sampling rate

while the Duo is used in standalone mode. The Duo can be used as an A/D

converter independent of the computer, using either the line inputs or the mic

preamp inputs. The relative positions of these DIP switches will determine the

sample rate at the S/PDIF output when used in standalone mode.

You will see the rather tiny numbers 1 and 2 at the bottom of the set of two DIP

switches. Using a miniature screwdriver or similar instrument, you can change

the position of each switch. The default setting is both switches “down,” which

is the position closest to the numbers 1 and 2, representing a sample rate of

44.1kHz. The full list of settings is as follows:

1. 44.1kHz: Both switches in the down position (down being in the direction of

the numbers).

2. 48kHz: Switch #1 down, switch #2 up.

3. 88kHz: Switch #1 up, switch #2 down.

4. 96kHz: Both switches in the up position.

Basic Theory of Operation

The Duo attaches easily to your computer’s USB port--no tools or computer

disassembly is necessary. Following the installation of the included driver software,

the Duo can be attached or unattached to your computer according to your needs.

The Duo is a 2x2 audio interface, providing two channels of audio TO the

computer and two channels of audio

FROM the computer. The Duo gives you

two high quality, low impedance Mic Inputs on XLR connectors, plus two

unbalanced Line Inputs on 1/4” TS jacks that can be used alternately. When a

Line Input is in use, the corresponding Mic Input is disabled.

The Duo can be configured for +4 or -10 line level operation simply by pressing

the “Line Level” buttons on the front and/or back panels. This allows for

seamless integration into the studio, giving you compatibility with professional

balanced (balanced TRS, +4dBu) or semi-pro (unbalanced TS, -10dBV) audio

devices (see section, “Using the Input and Output Level Switches”).

Audio from your computer is sent simultaneously to the Duo’s two

balanced/unbalanced Line Outputs on 1/4” TRS jacks, the coaxial S/PDIF

Output, and the Headphone Out. The Duo can also be used in a Standalone mode,

which connects the Mic/Line inputs directly to the Line Out, S/PDIF Out, and

Headphone Out. Pressing the “Standalone” switch turns the Duo into a mic

preamp and A/D converter that can be used independent of the computer.

Standalone mode can also give you a direct monitoring option when using the

Duo as an audio interface with your computer.

1 2 3 4 5 6 7 8 9 10 11 ... 26 27

No comments

M-audio Duo USB User Manual Page 6