Table of ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Features
Analog Outs,” “Analog Ins to ADAT,” and “ADAT Thru” are the modes thatwill function independent of the host computer, hence the term “standalone.”The
Synchronizing your ADATsUsing a BRC: You may need to keep your ADAT(s) in sync while transferringaudio to the Delta 1010 Recording System. This is ma
Limited Lifetime WarrantyMIDIMAN warrants that this product is free of defects in materials andworkmanship under normal use so long as the product is:
IntroductionCongratulations on your purchase of the Delta 1010 ADAT Interface, designedand manufactured by M Audio. The Delta 1010-AI is a companion
Front and Back Panel DescriptionsFront Panel1. ADAT to Host “Enabled” LED: When lit, this LED indicates that “ADAT toHost” mode has been enabled.2. AD
Back Panel1. 9v DC Power Adapter Jack: This jack accepts a 2.5 mm, 9v center positive500 mA power supply, provided with your Delta 1010-AI. Use only
Your setup should look like this:NOTE: If you are using your Delta 1010 solely for optical transfersand do not need A/D or D/A capability, it is not n
4. Plug the other end of the second optical cable into the TOSLink input jackof your ADAT or other 8-channel optical capable device.If you are using
Any device that transmits or receives the ADAT optical format may be usedwith the Delta 1010 ADAT Interface. Many digital mixers use this ADAT“standa
ADAT to Host: When “ADAT to Host” is enabled, the ADAT Optical input ofthe Delta 1010-AI becomes hardware inputs one through eight of the Delta1010 Re
Analog Ins to ADAT: When “Analog Ins to ADAT” mode is enabled, theanalog inputs 1 through 8 on your Delta 1010 rack mount unit are routedthrough the r
Comments to this Manuals